Wifi Access Point

• The Altai C1xan WiFi CPE/AP is designed as an essential component in the Altai Super WiFi system to extend outdoor Wi-Fi coverage into indoor areas for broadband connectivity in 5 GHz band or use as an AP for pico coverage. The Altai C1xan employs patented smart signal processing algorithms and antenna design to increase Wi-Fi signal strength (transmit and receive) by as much as 22 dB in areas covered by an A8n Super WiFi Base Station or A2 WiFi Access Point. It can be installed exactly where the throughput is required to boost up, and it allows the service operator to increase the coverage range of an A8n base station substantially and provides greater flexibility and cost savings to Wi-Fi deployments.

• The Altai C1xan employed 2-external SMA antenna port design. It allows the user to choose the exact antenna gain and beamwidth as they need. Our standard antenna accessories include 5 GHz 9 dBi omni, 16 dBi 100o sector and 20 dBi panel antennas for standard AP, CPE and bridge applications. User can also equip with his own high gain antenna for longer range AP, CPE and bridge applications.

• The C1xan is a key component in wireless broadband access provisioning. It can be installed outdoor by the side of a window, mounted to a wall, at the rooftop of a building or placed at the desktop inside for fixed broadband access provisioning. Altai C1xan for Access Point The C1xan can be used as a standalone Wi-Fi access point for networks operating at 5 GHz with fast Ethernet backhaul. With its flexible external antennas, it suits for different scenarios to complement the large coverage and high throughput of an A8n Base Station and A2 Access Point to improve Wi-Fi performance.

• The C1an is perfect for use as low cost point-to- point bridge, in deployment scenarios such as commercial wireless broadband users or high definition surveillance cameras.

• From day one, the C1xan is designed and purpose- built for carriers. Its built-in traffic shaping based bandwidth control mechanism allows the control of uplink and downlink traffic throughput on a per- client or per-VAP basis. A full set of networking and management features are available to meet carriers’ requirements.

• Features built-in for carriers including per client/VAP based bandwidth control, remote web-based management and client association status
• External antenna ports design allows users to choose exactly the antenna gain and beam width they need
• Low cost AP, C PE and bridge applications for outdoor and indoor areas
• One-piece weatherproof chassis compliant to IP55 standard for direct outdoor installation
• 8-level LED for easy alignment in the strongest signal direction
• Increase signal strength for both NLOS and LOS coverage areas
• Improve data transmission rate and throughput utilization of base station

• Dimension: 280 x 80 x 27 mm (excluding mounting)
• Weight: 0.4 kg
• Mounting: Desktop, Pole, Wall or Window-mounted
• Network Interface: 10/100 Mbps Ethernet Port
• LED Display: Main Power Status Ethernet Status 8-level Signal Strength (User configurable)

• Power Supply: 18V Passive PoE PD or 802.3af PoE PD via Adapter
• Power Consumption: 6 W (Typical) / 8 W (Max.)

• The Altai A3-Ei Dual-band 3x3 WiFi Access Point is designed to be used in Altai Super WiFi systems to provide high capacity 2.4 GHz and 5 GHz dual-band dual-concurrent access coverage for both outdoor and indoor areas, and to increase system capacity, extend coverage, fill-in areas of low or blocked signals caused by obstructions. It is capable of providing the highest possible data throughput and capacity that the 802.11ac 3x3 3-stream MIMO standards can offer.

• The A3-Ei can be used for wireless broadband access for both the residential users and commercial customers. It supports concurrent 2.4 GHz and 5 GHz dual-band operations, and is a cost effective and flexible solution which supports long access range with an Altai C1n or C1an CPE for 2.4 GHz and 5 GHz operation respectively.

• The A3-Ei supports up to 1.3 Gbps data rate high capacity PTP/PTMP bridging, fulfilling extra high throughput, high user capacity and fully IP-67 weatherproof bridging requirements. This is commonly used for hub site bridging such as campus network, city network or surveillance.

• The A3-Ei has both a high capacity 2.4 GHz (3x3:3 802.11b/g/n) radio and a 5 GHz (3x3:3 802.11a/n/ac) radio which can be operated at the same time for 2.4 GHz and 5 GHz dual-band dual-concurrent access coverage. The dual-band operations not only provide the highest capacity up to 1.75 Gbps but also perform better in the less interfered 5 GHz frequency band.

• Multi-operating modes allowed: AP, bridge, repeater mode or CPE
• 3x3:3 MIMO for both 2.4 GHz (802.11 b/g/n) and 5 GHz (802.11a/n/ac) radios
• Built-in 2.4 GHz and 5 GHz 3x3 spatial polarized high gain sector antennas
• High capacity 1300 Mbps in 5 GHz and 450 Mbps in 2.4 GHz
• 2.4 GHz and 5 GHz dual-band dual concurrent access
• IP-67 rated carrier grade dual-band AP for both outdoor and indoor applications
• Fill-in coverage area in challenging RF environment
• Light weight with built-in lightning protection
• Easy installation 8, web-based management

• Authentication – Open system, Shared key, WPA/ WPA-
• PSK, WPA2/ WPA2-PSK, 802.1x (EAP-PEAP/ TLS/ TTLS/ SIM/ AKA)
• Encryption – WEP, TKIP, AES
• Inter/ Intra-client Isolation
• MAC-based Access Control (White/ Black List)
• RADIUS
• Active directory
• Firewall
• WIPS

• Cloud or Server-based Management by AltaiCare
• Controller-based Management by Access Controller
• Web User Interface
• Command Line Interface (SSH)
• SNMP v1/ v2c / v3
• MIB2/ IF-MIB/ Altai Enterprise MIB
• Syslog
• Auto Channel Selection and TX Power Control
• Spectral Analysis
• KPI Monitoring
• Client OS Detection

• Dimension: 491 x 221 x 73mm
• Weight: 2.1 kg (Unit Weight) / 2.5 kg (With Mounting Kit)
• Mounting: Pole or Wall-mounted
• Network Interface: 10/100/1000 Mbps Ethernet Port

• Power Supply: 802.3at PoE PD, 56V Passive PoE PD or -48V DC PoE Injector
• Power Consumption: 10 W (Typical) / 25 W (Max.)

• Operating Temperature: -40 °C to +60 °C (Ambient) 0 °C to +40 °C (PoE Injector)

The Altai VX200 is an industrial CPE/AP specifically designed to deliver unparalleled Wi-Fi experience and highly reliable connectivity at the market’s most affordable price point.Dual-Band Concurrent Operating in both 2.4 GHz and 5 GHz bands, the VX200 is backward- compatible with existing 802.11a/b/g/n/ac deployments
???Wave 2 MU-MIMO MU-MIMO significantly improves multi-client capacity, and dual radios deliver data rates up to 867 Mbps at 5 GHz and 400 Mbps at 2.4 GHz
???Fast Roaming Technology Allows the VX200 to roam seamlessly between APs, with handover time of < 120 ms under WPA2
???Redundant Link VX200’s dual radios can connect to two APs simultaneously, with one as an active link and the other as backup, ensuring a highly reliable wireless connection
???Compact Size The VX200’s size is 120x85x32mm; making it one of the smallest Industrial CPEs in the market
??? Anti-Vibration
protection
standards) makes the VX200 ideally suited for installation on AGV/AS/RS platforms
???Industrial Ruggedness Integrated power isolation and enhanced surge and ESD protection against environmental interference
??? Graphene Coating Industrial-grade housing with Advanced Graphene Coating helps VX200 dissipate heat even in confined space.
???Flexible Deployment Options Supported by multiple management platforms: standalone, controller, or cloud-based / on-premises by AltaiCare